Description：
The PoE Injector is a single port passive PoE injector offera compactand cost effective, It can convert standard 100~240V/AC power intolow voltage, DC that runs over existing LAN cable to power up LAN(WAN)access potints, PoE High power Ip cameras and wirelessAP , Other high power PD equipment.
The PoE Injector Passive PoE Mid-spans no need for external powersupply and its associated AC/Dc power cabling,providing a compactaffordable, safe and reliable power solution over existing Ethernetinfrastructure.
Feature:
Up to 60W of Power on 4-pairs
Supports 10/100/1000Base-Tapplications
LED indicators powerinput indication
Internal AC/DC converter no need for external power brick
Easy plug-and-play installation
Muti-protection
Specifications:
| Item | Description |
| No. of Ports | 1 |
| Pass Through Data Rates | 10/100Mbps |
| Power over Ethernet Output | Power Pin Assignment: 1/2,4/5(+) 3/6,7/8(-) |
| Output Power Voltage: 54VDC | |
| User Port Power: 60W | |
| Input Power Requirements | AC Input Voltage: 100 to 240 Vac |
| AC Input Current: 110V@1.2A,220V@0.5A | |
| AC Frequency: 50 to 60 Hz | |
| Dimensions | 145mmx60mmx40mm |
| Indicators | PWR Indicator:AC Power |
| PoE Indicator:Channel Power | |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Protection | Over current protection |
| Over load protection | |
| Over voltage protection | |
| Anti-interference protection | |
| Environmental Conditions | Operating Ambient Temperature:0℃ to 45℃ |
| Operating Humidity: Maximum 85%, Non-condensing | |
| Storage Temperature:-10 to 60℃ | |
| Storage Humidity: Maximum 90%, Non-condensing |