12V2A or 24V1A 10/100/1000 Mbps PoE Splitter
Description：
High-Power aetive splitters enable data terminals that were not originally designed to acceptpower from the Ethernet, to be powered by Power over Ethernet midspans. High Power splittercan power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points,Thin- Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video-Phones and more. Provide two voltageoutputs of 12V or 24V, which ean be switched by a switch to meet the power supply needs ofmoreproducts
High Power Splitter Solution
Many contemporary terminals are designed and deployed without the ability to aecept power viatheir LAN input, Such devices ean only accept power through their DC jack while their RJ45input aceepts only data. Moreover, such devices might only accept voltage levels lowver than thePoE standard minimum voltage (44v in lEEE802.3af/ 50v in 802.3at). Using the high-powersplitter, these terminals immediately become PoE-ready without any modification required ontheir side. The splitter is identified as a powered device (PD) in front ofthe powering Midspan andafter being deteeted and powered, it physically splits the data and power streams, arriving over asingle cable, into wo separate cords (LAN & DC) which go direetly to the data terminal, Voltageregulation is also performed to the level required by the terminal.
Feature:
Connectors: 2 xRJ-45,shielded, EIA 568A and 568B DC Jacks
On unit:5.5X2.1mm
Data Rate:10/100/1000M
Electrical Pin Assignment & Polarity: 3/6(+),1/2(-)and 4/5(+)7/8(-)
Input voltage:44-57VDC
Input power:30W max
Output power:24Wmax
Output Current: Dc12V(±0.4V)@2A or DC24V(±0.4V)@1A(Switch switching)
Dimensions &Weight:81mm(L)x62 mm(W)x27mm(H)
Indicators:Output Power Indicators: Green LED EnvironmentalOperating Temp:-10 to 40°C
Storage Temp:-30 to 70°C
Operating Humidity:10%to90%,non-condensing
Storage Humidity:5%to95%,non-condensing
Specifications:
| Item | Description |
| Ports | 1 10/100/1000M RJ45 PoE Port (DATA + POWER IN) 1 10/100/1000M RJ45 LAN Port (Only DATA) 1 DC Jack (DC OUT) |
| Network Media | 10Mbps: Cat 3,4,5 Unshielded Cable 100Mbps: Cat 5,5E Unshielded Cable 1000Mbps: Cat 5E,6 Unshielded Cable |
| Pass Through Data Rates | 10/100/1000 Mbps |
| Power Output | Adjustable 12V2A or 24V1A |
| Input Power Requirements | DC Input Voltage: 36 to 57 Vac |
| Indicators | PoE ready / in-use |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Dimensions | 81x62x27mm |
| Reliability | MTBF: 100,000 hrs. @25℃ |
| Environmental Conditions | Operating Ambient Temperature:-10-40°C Operating Humidity:10-90%, non-condensing Storage Temperature: -30 to 70°C Storage Humidity:5-95%,non-condensing |
Regulatory Compliance | IEEE 802.3af/at(PoE) IEEE 802.3(Ethernet) IEEE 802.3u(Fast Ethernet) IEEE 802.3ab(Gigabit Ethernet) RoHS Compliant,CE,FCC |