Description：
The PoE Injector is a single port Passive PoE Injector offer a compact and cost effective, It can convert standard 100~240V /AC power into lowvoltage.DC that runs over existing LAN cable to power up 24W. compliant networ k accessories . Remote powering of wireles s LAN(WAN) acces s point s , IP Securit y cameras , VoIP telephone and other low port densit y installations .
The PoE Mid-spans no need to connect with external power supply and its associated AC/DC power cabling,providing a compact ,affor-adble,safe and reliable power solution over existing Ethernet infrast-ructure.
Feature:
Up to 24W of Power on 2-pairs
10/100/1000Base-Tapplications
Internal AC/DC converter no need for external power brick
Easy plug-and-play installation
Muti-protection
Specifications:
| Item | Description |
| No. of Ports | 1 |
| Pass Through Data Rates | 10/100/1000Mbps |
| Power over Ethernet Output | Power Pin Assignment:4/5(+),7/8(-) |
| Output Power Voltage: 48VDC | |
| User Port Power: 24W | |
| Input Power Requirements | AC Input Voltage: 100 to 240 Vac |
| AC Input Current: 0.5A 100-240 VAC | |
| AC Frequency: 50 to 60 Hz | |
| Dimensions | 85mmx47mmx50mm |
| Indicators | PWR Indicator:AC Power |
| PoE Indicator:Channel Power | |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Protection | Over current protection |
| Over load protection | |
| Over voltage protection | |
| Anti-interference protection | |
| Environmental Conditions | Operating Ambient Temperature:0℃ to 40℃ |
| Operating Humidity: Maximum 85%, Non-condensing | |
| Storage Temperature:-40 to 60℃ | |
| Storage Humidity: Maximum 90%, Non-condensing |